Vanner IT24-3500 Owner's Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
Specifications and Features
IT SERIES Industrial True Sine Wave Inverter Owners Manual
6
2 Specifications and Features
Specifications
Figure 1
Specifications for models rated up through 2400 watts.
Model Number
SPECIFICATIONS
IT12-1400 IT12-1600 IT12-1800 IT12-2000
IT12-2200S
IT12-2400
AC Power Output
Rated Output Watts * 1400W 1600W 1800W 2000W 2200W 2400W
Continuous Output
11.7A
1400W
13.3A
1600W
15.0A
1800W
16.7A
2000W
18.3A
2200W
20.0 A
2400W
Surge Output at 3 seconds 22.9A 23.8A 24.7A 25.6A 41.1A 41.6A
Output Waveform True Sine Wave
Total Harmonic Distortion Less than 4% THD for all loads up to surge output
Output Voltage 120 Volts ± 5%
Output Frequency 60 Hz ± 0.025 Hz (0.04%)
DC Input Voltage Range
IT12-XXXX = 10.5 - 16.6 VDC / IT24-3500 = 21.0 TO 33.2 VDC
DC Input Current
Inverter OFF 1 ma
Inverter ON in Load Demand
Mode (No AC load)
IT12-XXXX =0.5 amps / IT24-3500 = .255 amps
Full load at 12VDC 160A 185A 210A 225A 235A 260A
AC Output Wiring Method
One Built-in Receptacle GFCI Duplex Receptacle protected by a 15 amp circuit breaker
Output AC-1: protected by a 20 amp circuit breaker on models up through
2400 watts, 30 amp circuit breaker on models 2600 watts and higher
Two Hardwire Output Circuits
Output AC-2 protected by the 15 amp GFCI feedthrough on all units
System
Ambient Operating
Temperature
-40 to +105ºF (-40 to +40ºC)
Cooling Air Thermostatically controlled intake fan
Enclosure White painted aluminum
Dimensions - All Models 8.0"H x 13.75"W x 15.75"D
Unit Weight 45 Ibs 46 Ibs 47 lbs
48 lbs 57 lbs 70 lbs
*Note: The inverter will try to power any load, even a short circuit, for 3 seconds. When the load exceeds the
inverter's rated output the Overload Indicator Light will turn ON. After 3 seconds, the inverter will reduce the
AC Output Voltage as needed to limit the AC Output Current. If the inverter reduces output voltage below
108 volts for 10 seconds, the inverter will shut itself OFF for Overload.
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments